Detection of changes in regional colonic fermentation in response to supplementing a low FODMAP diet with dietary fibres by hydrogen concentrations, but not by luminal pH.

BACKGROUND: Carbohydrate fermentation plays a pivotal role in maintaining colonic health with excessive proximal and deficient distal fermentation being detrimental. AIMS: To utilise telemetric gas- and pH-sensing capsule technologies for defining patterns of regional fermentation following dietary manipulations, alongside conventional techniques of measuring fermentation. METHODS: In a double-blind crossover trial, 20 patients with irritable bowel syndrome were fed low FODMAP diets that included no extra fibre (total fibre content 24 g/day), or additional poorly fermented fibre, alone (33 g/day) or with fermentable fibre (45 g/day) for 2 weeks. Plasma and faecal biochemistry, luminal profiles defined by tandem gas- and pH-sensing capsules, and faecal microbiota were assessed. RESULTS: Plasma short-chain fatty acid (SCFA) concentrations (µmol/L) were median (IQR) 121 (100-222) with fibre combination compared with 66 (44-120) with poorly fermented fibre alone (p = 0.028) and 74 (55-125) control (p = 0.069), but no differences in faecal content were observed. Luminal hydrogen concentrations (%), but not pH, were higher in distal colon (mean 4.9 [95% CI: 2.2-7.5]) with fibre combination compared with 1.8 (0.8-2.8) with poorly fermented fibre alone (p = 0.003) and 1.9 (0.7-3.1) control (p = 0.003). Relative abundances of saccharolytic fermentative bacteria were generally higher in association with supplementation with the fibre combination. CONCLUSIONS: A modest increase in fermentable plus poorly fermented fibres had minor effects on faecal measures of fermentation, despite increases in plasma SCFA and abundance of fermentative bacteria, but the gas-sensing capsule, not pH-sensing capsule, detected the anticipated propagation of fermentation distally in the colon. The gas-sensing capsule technology provides unique insights into localisation of colonic fermentation. TRIAL REGISTRATION: ACTRN12619000691145.

Comparison of gastrointestinal landmarks using the gas-sensing capsule and wireless motility capsule.

BACKGROUND: Accurate definition of the gastroduodenal and ileocaecal junctions (GDJ, ICJ) is essential for the measurement of regional transit times. AIMS: To compare the assessment of these landmarks using the novel gas-sensing capsule and validated wireless motility capsule (WMC), and to evaluate intra-subject variance in transit times METHODS: Healthy subjects ingested the gas-sensing capsule and WMC tandemly in random order. Inter-observer agreement was evaluated by intra-class correlation coefficient (ICC). Agreement between the paired devices' transit times was assessed using Bland-Altman analysis; coefficient of variation was performed to express intra-individual variance in transit times. Similar analyses were completed with tandemly ingested gas-sensing capsules. RESULTS: The inter-observer agreement for landmarks for both capsules was excellent (mean ICC ≥0.97) in 50 studies. The GDJ was identifiable in 92% of the gas-sensing capsule studies versus 82% of the WMC studies (p = 0.27); the ICJ in 96% versus 84%, respectively (p = 0.11). In the primary cohort (n = 26), median regional transit times differed by less than 6 min between paired capsules. Bland-Altman revealed a bias of -0.12 (95% limits of agreement, -0.94 to 0.70) hours for GDJ and - 0.446 (-2.86 to 2.0) hours for ICJ. Similar results were found in a demographically distinct validation cohort (n = 24). For tandemly ingested gas-sensing capsules, coefficients of variation of transit times were 11%-35%, which were similar to variance between the paired gas-sensing capsule and WMC, as were the biases. The capsules were well tolerated. CONCLUSIONS: Key anatomical landmarks are accurately identified with the gas-sensing capsule in healthy individuals. Intra-individual differences in transit times between capsules are probably due to physiological factors. Studies in populations with gastrointestinal diseases are now required.

Fringe analysis approach for imaging surface undulations on technical surfaces.

Automated defect inspection is becoming increasingly important for advanced manufacturing. The ability to automatically inspect for critical defects early in the production cycle can reduce production costs and resources on unnecessary manufacturing steps. While there are many inspection techniques available, samples from early in a production workflow can prove challenging as they may still have systematic tooling marks, causing preferential scattering and hindering defect extraction. We propose a new imaging technique that exploits the preferential scattering from a technical surface to generate predictable fringe patterns on the sample's surface using only an array of LEDs. The patterns from this adapted fringe projection technique are imaged, and phase shifting algorithms are used to recover surface undulations on the sample. We implement this technique in the context of Hard Disk Drive platters that exhibit tooling marks from the lapping process and show that it is possible to image both highly scattering pits and scratches, as well as slow surface undulations with the same apparatus.

Microfluidic dielectrophoretic cell manipulation towards stable cell contact assemblies.

Cell contact formation, which is the process by which cells are brought into close proximity is an important biotechnological process in cell and molecular biology. Such manipulation is achieved by various means, among which dielectrophoresis (DEP) is widely used due to its simplicity. Here, we show the advantages in the judicious choice of the DEP microelectrode configuration in terms of limiting undesirable effects of dielectric heating on the cells, which could lead to their inactivation or death, as well as the possibility for cell clustering, which is particularly advantageous over the linear cell chain arrangement typically achieved to date with DEP. This study comprises of experimental work as well as mathematical modeling using COMSOL. In particular, we establish the parameters in a capillary-based microfluidic system giving rise to these optimum cell-cell contact configurations, together with the possibility for facilitating other cell manipulations such as spinning and rotation, thus providing useful protocols for application into microfluidic bioparticle manipulation systems for diagnostics, therapeutics or for furthering research in cellular bioelectricity and intercellular interactions.

The safety and sensitivity of a telemetric capsule to monitor gastrointestinal hydrogen production in vivo in healthy subjects: a pilot trial comparison to concurrent breath analysis.

BACKGROUND: Intestinal gases are currently used for the diagnosis of disorders including small intestinal bacterial overgrowth and carbohydrate malabsorption. AIM: To compare the performance of measuring hydrogen production within the gut directly with the telemetric gas-sensing capsule with that of indirect measurement through breath testing. METHODS: Using standard breath testing protocols, the capsules and breath tests were simultaneously evaluated in a single-blinded trial in 12 healthy subjects. Eight received a single dose of 1.25-40 g inulin and four 20 or 40 g glucose. Safety and reliability of the capsules were also assessed. RESULTS: There were no reported adverse events. All capsules were retrieved and operated without failure. Capsule measurements were in agreement with breath test measurements in magnitude but not in timing; minimal hydrogen production was observed after glucose ingestion and capsule measurements correlated with breath hydrogen after ingestion of 40 g inulin. A dose-dependent increase in concentration of hydrogen was observed from the capsule following ingestion of inulin as low as 1.25 g compared with >10 g for breath measurements. Specifically, the capsule measured >3000 times higher concentrations of hydrogen compared to breath tests, resulting in a signal-to-noise ratio of 23.4 for the capsule compared to 4.2 for the breath test. CONCLUSIONS: The capsule showed high sensitivity and signal-to-noise ratio in measuring luminal hydrogen concentrations, provided information on the site of intestinal gas production, and demonstrated safety and reliability. The capsule has potential for improving diagnostic precision for disorders such as small intestinal bacterial overgrowth.

Quasi physisorptive two dimensional tungsten oxide nanosheets with extraordinary sensitivity and selectivity to NO2.

Attributing to their distinct thickness and surface dependent physicochemical properties, two dimensional (2D) nanostructures have become an area of increasing interest for interfacial interactions. Effectively, properties such as high surface-to-volume ratio, modulated surface activities and increased control of oxygen vacancies make these types of materials particularly suitable for gas-sensing applications. This work reports a facile wet-chemical synthesis of 2D tungsten oxide nanosheets by sonication of tungsten particles in an acidic environment and thermal annealing thereafter. The resultant product of large nanosheets with intrinsic substoichiometric properties is shown to be highly sensitive and selective to nitrogen dioxide (NO2) gas, which is a major pollutant. The strong synergy between polar NO2 molecules and tungsten oxide surface and also abundance of active surface sites on the nanosheets for molecule interactions contribute to the exceptionally sensitive and selective response. An extraordinary response factor of ∼30 is demonstrated to ultralow 40 parts per billion (ppb) NO2 at a relatively low operating temperature of 150 °C, within the physisorption temperature band for tungsten oxide. Selectivity to NO2 is demonstrated and the theory behind it is discussed. The structural, morphological and compositional characteristics of the synthesised and annealed materials are extensively characterised and electronic band structures are proposed. The demonstrated 2D tungsten oxide based sensing device holds the greatest promise for producing future commercial low-cost, sensitive and selective NO2 gas sensors.

A Gallium-Based Magnetocaloric Liquid Metal Ferrofluid.

We demonstrate a magnetocaloric ferrofluid based on a gadolinium saturated liquid metal matrix, using a gallium-based liquid metal alloy as the solvent and suspension medium. The material is liquid at room temperature, while exhibiting spontaneous magnetization and a large magnetocaloric effect. The magnetic properties were attributed to the formation of gadolinium nanoparticles suspended within the liquid gallium alloy, which acts as a reaction solvent during the nanoparticle synthesis. High nanoparticle weight fractions exceeding 2% could be suspended within the liquid metal matrix. The liquid metal ferrofluid shows promise for magnetocaloric cooling due to its high thermal conductivity and its liquid nature. Magnetic and thermoanalytic characterizations reveal that the developed material remains liquid within the temperature window required for domestic refrigeration purposes, which enables future fluidic magnetocaloric devices. Additionally, the observed formation of nanometer-sized metallic particles within the supersaturated liquid metal solution has general implications for chemical synthesis and provides a new synthetic pathway toward metallic nanoparticles based on highly reactive rare earth metals.

Ionic imbalance induced self-propulsion of liquid metals.

Components with self-propelling abilities are important building blocks of small autonomous systems and the characteristics of liquid metals are capable of fulfilling self-propulsion criteria. To date, there has been no exploration regarding the effect of electrolyte ionic content surrounding a liquid metal for symmetry breaking that generates motion. Here we show the controlled actuation of liquid metal droplets using only the ionic properties of the aqueous electrolyte. We demonstrate that pH or ionic concentration gradients across a liquid metal droplet induce both deformation and surface Marangoni flow. We show that the Lippmann dominated deformation results in maximum velocity for the self-propulsion of liquid metal droplets and illustrate several key applications, which take advantage of such electrolyte-induced motion. With this finding, it is possible to conceive the propulsion of small entities that are constructed and controlled entirely with fluids, progressing towards more advanced soft systems.

Controlled Electrochemical Deformation of Liquid-Phase Gallium.

Pure gallium is a soft metal with a low temperature melting point of 29.8 °C. This low melting temperature can potentially be employed for creating optical components with changeable configurations on demand by manipulating gallium in its liquid state. Gallium is a smooth and highly reflective metal that can be readily maneuvered using electric fields. These features allow gallium to be used as a reconfigurable optical reflector. This work demonstrates the use of gallium for creating reconfigurable optical reflectors manipulated through the use of electric fields when gallium is in a liquid state. The use of gallium allows the formed structures to be frozen and preserved as long as the temperature of the metal remains below its melting temperature. The lens can be readily reshaped by raising the temperature above the melting point and reapplying an electric field to produce a different curvature of the gallium reflector.

Exfoliation Solvent Dependent Plasmon Resonances in Two-Dimensional Sub-Stoichiometric Molybdenum Oxide Nanoflakes.

Few-layer two-dimensional (2D) molybdenum oxide nanoflakes are exfoliated using a grinding assisted liquid phase sonication exfoliation method. The sonication process is carried out in five different mixtures of water with both aprotic and protic solvents. We found that surface energy and solubility of mixtures play important roles in changing the thickness, lateral dimension, and synthetic yield of the nanoflakes. We demonstrate an increase in proton intercalation in 2D nanoflakes upon simulated solar light exposure. This results in substoichiometric flakes and a subsequent enhancement in free electron concentrations, producing plasmon resonances. Two plasmon resonance peaks associated with the thickness and the lateral dimension axes are observable in the samples, in which the plasmonic peak positions could be tuned by the choice of the solvent in exfoliating 2D molybdenum oxide. The extinction coefficients of the plasmonic absorption bands of 2D molybdenum oxide nanoflakes in all samples are found to be high (ε > 10(9) L mol(-1) cm(-1)). It is expected that the tunable plasmon resonances of 2D molybdenum oxide nanoflakes presented in this work can be used in future electronic, optical, and sensing devices.

Acoustically-Driven Trion and Exciton Modulation in Piezoelectric Two-Dimensional MoS2.

By exploiting the very recent discovery of the piezoelectricity in odd-numbered layers of two-dimensional molybdenum disulfide (MoS2), we show the possibility of reversibly tuning the photoluminescence of single and odd-numbered multilayered MoS2 using high frequency sound wave coupling. We observe a strong quenching in the photoluminescence associated with the dissociation and spatial separation of electrons-holes quasi-particles at low applied acoustic powers. At the same applied powers, we note a relative preference for ionization of trions into excitons. This work also constitutes the first visual presentation of the surface displacement in one-layered MoS2 using laser Doppler vibrometry. Such observations are associated with the acoustically generated electric field arising from the piezoelectric nature of MoS2 for odd-numbered layers. At larger applied powers, the thermal effect dominates the behavior of the two-dimensional flakes. Altogether, the work reveals several key fundamentals governing acousto-optic properties of odd-layered MoS2 that can be implemented in future optical and electronic systems.

Physisorption-Based Charge Transfer in Two-Dimensional SnS2 for Selective and Reversible NO2 Gas Sensing.

Nitrogen dioxide (NO2) is a gas species that plays an important role in certain industrial, farming, and healthcare sectors. However, there are still significant challenges for NO2 sensing at low detection limits, especially in the presence of other interfering gases. The NO2 selectivity of current gas-sensing technologies is significantly traded-off with their sensitivity and reversibility as well as fabrication and operating costs. In this work, we present an important progress for selective and reversible NO2 sensing by demonstrating an economical sensing platform based on the charge transfer between physisorbed NO2 gas molecules and two-dimensional (2D) tin disulfide (SnS2) flakes at low operating temperatures. The device shows high sensitivity and superior selectivity to NO2 at operating temperatures of less than 160 °C, which are well below those of chemisorptive and ion conductive NO2 sensors with much poorer selectivity. At the same time, excellent reversibility of the sensor is demonstrated, which has rarely been observed in other 2D material counterparts. Such impressive features originate from the planar morphology of 2D SnS2 as well as unique physical affinity and favorable electronic band positions of this material that facilitate the NO2 physisorption and charge transfer at parts per billion levels. The 2D SnS2-based sensor provides a real solution for low-cost and selective NO2 gas sensing.

Electronic Tuning of 2D MoS2 through Surface Functionalization.

The electronic properties of thiol-functionalized 2D MoS2 nanosheets are investigated. Shifts in the valence and conduction bands and Fermi levels are observed while bandgaps remain unaffected. These findings allow the tuning of energy barriers between 2D MoS2 and other materials, which can lead to improved control over 2D MoS2 -based electronic and optical devices and catalysts.

Plasmon resonances of highly doped two-dimensional MoS2.

The exhibition of plasmon resonances in two-dimensional (2D) semiconductor compounds is desirable for many applications. Here, by electrochemically intercalating lithium into 2D molybdenum disulfide (MoS2) nanoflakes, plasmon resonances in the visible and near UV wavelength ranges are achieved. These plasmon resonances are controlled by the high doping level of the nanoflakes after the intercalation, producing two distinct resonance peak areas based on the crystal arrangements. The system is also benchmarked for biosensing using bovine serum albumin. This work provides a foundation for developing future 2D MoS2 based biological and optical units.

Liquid metal/metal oxide frameworks with incorporated Ga2O3 for photocatalysis.

Solvothermally synthesized Ga2O3 nanoparticles are incorporated into liquid metal/metal oxide (LM/MO) frameworks in order to form enhanced photocatalytic systems. The LM/MO frameworks, both with and without incorporated Ga2O3 nanoparticles, show photocatalytic activity due to a plasmonic effect where performance is related to the loading of Ga2O3 nanoparticles. Optimum photocatalytic efficiency is obtained with 1 wt % incorporation of Ga2O3 nanoparticles. This can be attributed to the sub-bandgap states of LM/MO frameworks, contributing to pseudo-ohmic contacts which reduce the free carrier injection barrier to Ga2O3.

Substoichiometric two-dimensional molybdenum oxide flakes: a plasmonic gas sensing platform.

Two-dimensional (2D) molybdenum oxides at their various stoichiometries are promising candidates for generating plasmon resonances in visible light range. Herein, we demonstrate plasmonic 2D molybdenum oxide flakes for gas sensing applications, in which hydrogen (H2) is selected as a model gas. The 2D molybdenum oxide flakes are obtained using a grinding-assisted liquid exfoliation method and exposed to simulated sunlight to acquire its substoichiometric quasi-metallic form. After the exposure to H2 gas molecules, the quasi-metallic molybdenum oxide flakes are partially transformed into semiconducting states, thus gradually losing their plasmonic properties. The novel 2D plasmonic sensing platform is tested using different concentrations of H2 gas at various operating temperatures to comprehensively assess its sensing performance. The presented 2D plasmonic system offers great opportunities for future sensing and optical applications.

Ion-driven photoluminescence modulation of quasi-two-dimensional MoS2 nanoflakes for applications in biological systems.

Quasi-two-dimensional (quasi-2D) molybdenum disulfide (MoS2) is a photoluminescence (PL) material with unique properties. The recent demonstration of its PL, controlled by the intercalation of positive ions, can lead to many opportunities for employing this quasi-2D material in ion-related biological applications. Here, we present two representative models of biological systems that incorporate the ion-controlled PL of quasi-2D MoS2 nanoflakes. The ion exchange behaviors of these two models are investigated to reveal enzymatic activities and cell viabilities. While the ion intercalation of MoS2 in enzymatic activities is enabled via an external applied voltage, the intercalation of ions in cell viability investigations occurs in the presence of the intrinsic cell membrane potential.

Electrochemical control of photoluminescence in two-dimensional MoS(2) nanoflakes.

Two-dimensional (2D) transition metal dichalcogenide semiconductors offer unique electronic and optical properties, which are significantly different from their bulk counterparts. It is known that the electronic structure of 2D MoS2, which is the most popular member of the family, depends on the number of layers. Its electronic structure alters dramatically at near atomically thin morphologies, producing strong photoluminescence (PL). Developing processes for controlling the 2D MoS2 PL is essential to efficiently harness many of its optical capabilities. So far, it has been shown that this PL can be electrically or mechanically gated. Here, we introduce an electrochemical approach to actively control the PL of liquid-phase-exfoliated 2D MoS2 nanoflakes by manipulating the amount of intercalated ions including Li(+), Na(+), and K(+) into and out of the 2D crystal structure. These ions are selected as they are crucial components in many bioprocesses. We show that this controlled intercalation allows for large PL modulations. The introduced electrochemically controlled PL will find significant applications in future chemical and bio-optical sensors as well as optical modulators/switches.

In situ SERS probing of nano-silver coated individual yeast cells.

For understanding cells functionalities and their communications, there is a need for highly sensitive cell analysis platforms capable of assessing non-specific chemicals on the surface and in the vicinity of cells. We report a microfluidic system integrating dielectrophoresis and surface enhanced Raman scattering (SERS) for the trapping and real time monitoring of cell functions in isolated and grouped cell clusters. Yeast cells are coated with silver nanoparticles to enable highly sensitive SERS analysis. The SERS responses of cells are examined under various conditions: live vs. dead and isolated vs. grouped. This work illustrates the feasibility of the system for in situ cell monitoring and analysis of secreted chemicals during their growth, metabolism, proliferation and apoptosis.

Microfluidics and Raman microscopy: current applications and future challenges.

Raman microscopy systems are becoming increasingly widespread and accessible for characterising chemical species. Microfluidic systems are also progressively finding their way into real world applications. Therefore, it is anticipated that the integration of Raman systems with microfluidics will become increasingly attractive and practical. This review aims to provide an overview of Raman microscopy-microfluidics integrated systems for researchers who are actively interested in utilising these tools. The fundamental principles and application strengths of Raman microscopy are discussed in the context of microfluidics. Various configurations of microfluidics that incorporate Raman microscopy methods are presented, with applications highlighted. Data analysis methods are discussed, with a focus on assisting the interpretation of Raman-microfluidics data from complex samples. Finally, possible future directions of Raman-microfluidic systems are presented.